2016 Exmark PNS720GKC523A4

Call for Price


Availability
Brochure
Year
2016
Manufacturer
Exmark
Model
PNS720GKC523A4

Overview

Description

Proof that value and performance are not mutually exclusive.



The Pioneer S-Series gives lawn care professionals even more to like. The 48- and 52-inch models receive the patented UltraCut™ Series 3 deck system. And the 60-inch gets the UltraCut Series 4, the same deck used on our Lazer Z® S-Series mower, featuring heavy-duty cutter housings and a deeper deck for increased productivity. The S-Series also gives you the choice of a ZT3100 (on 48”–52”). The 60” models ZT3400 integrated transmission provide a seriously smooth ride. Can also reach speeds up to 9 mph, which results in maximum productivity. Comes equipped with the full-suspension seat which enhances operator comfort. Not available in CA.

Features
  • Superior Air Filtration: This series comes standard with heavy-duty canister air filtration systems for longer engine life, more efficient performance and simple maintenance.
  • Maintenance-Free Spindles: Commercial-grade, cast aluminum spindles feature sealed bearings to resist damage from moisture and impact, with no annual greasing required.
  • Commercial Grade Deck: UltraCut™ Series 3 and 4 decks
  • Productivity: The S-Series can reach speeds up to 9mph* covering up to 5.5 acres per hour. *Based on the PNS740GKC60400 model.
  • Comfort Counts: The Pioneer features a bolstered seat with coil-spring suspension. Because operator comfort and productivity go hand-in-hand.
Equipment
  • Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98")diameter spindle shaft and splined blade driver.
  • Drive Tires: 22 x 9.5-12 Super Turf®
  • Cup Holder: Standard
  • Tractor Frame: Unibody, welded, heavy-duty 2" square tublar steel.
  • Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.
  • Front Caster Tires: 13 x 5.0-6, smooth tread, pneumatic.
  • Parking Brake: Lever-actuated pawl brake.
  • Seat: Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Hinged mounting. Adjustment: Fore and aft from Operators’ Position.
  • Electrical: 12-volt battery with 15-amp alternator.
Power Components
  • Engine Brand: Kohler®
  • Engine Model: ZT720
  • Engine Displacement: 725
  • Engine Series: Command™
  • Engine Type: Carbureted
  • Engine Speed: 3,700 rpm
  • Air Filter: Cyclonic Air Cleaner
  • Fuel Type: Gas Carbureted
  • Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location.
  • Fuel Indicator: None
  • Drive: Hydro-Drive
  • Drive Description: Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.
  • Speed: Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
  • Carb Compliant: No
  • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
  • Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • ROPS: 2-post foldable ROPS standard with seat belt and latch.
  • PTO Engagement: MagStop electromagnetic 175-ft-lb clutch
  • Drive Wheel Release: Allows unit movement without engine running.
  • Casters: .38" thick caster yoke arms
Decks
  • Width / Cutting Deck: 52"
  • Deck Style: Floating Deck
  • Deck Style Description: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Deck Construction: 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
  • Blade Tip Speed: Approximately 18,500 fpm.
  • Cutting Heights: 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
  • Blades: 3 Blades at 18.00" Length
Dimensions
  • Width: 65 in. (165 cm)
  • Length: 78 in. (198 cm)
  • Height: 72 in. (183 cm)
  • Curb Weight: 835

Specs

Engine

Engine Manufacturer
Kohler®
Engine Type
ZT720 Command™
Displacement
725cc

General

Transmission
Hydro-Drive
Wheel Size
Drive: 22 x 9.5-12; Caster: 13 x 5.0-6
Fuel Capacity
7 gal. (26.5-L)

Deck

Deck Size
52 in.
Discharge Type
Side; Optional: Bag, Mulch

Promotions


Related Products