|
SPECIFICATIONS
|
|
MODEL
|
MODEL S |
MODEL C |
MODEL D* |
MODEL T** |
|
ENGINE SPECIFICATIONS
|
| Manufacturer/Model |
Kawasaki FE350, 1 cyl |
Kohler OHC 2 cyl |
Kubota D722 |
Kohler CH20, 2 cyl |
| Displacement |
351CC (21.4 cu. in.) |
520CC (31.7 cu. in.) |
722CC (44.0 cu. in) |
624CC (38.1 cu. in.) |
| HP/RPM |
11 @ 3600 |
16 @ 3600 |
20.9 @ 3600 |
20 @ 3600 |
| Max Torque
(ft-lbs) |
17.4 @ 2500 |
26.2 @ 2500 |
34 @ 2600 |
32 @ 2500 |
| Fuel |
Gasoline (unleaded) |
Gasoline (unleaded) |
Diesel Fuel (2-D) |
Gasoline (unleaded) |
| Fuel Capacity |
1.7 (6.4 liter) |
3.0 (11.4 liter) |
4.3 (16.3 liter) |
4.3 (16.3 liter) |
| Cooling System |
Air |
Air |
Liquid, Radiator |
Air |
| Lubrication
System |
Full Pressure w/Filter |
Full Pressure w/Filter |
Full Pressure w/Filter |
Full Pressure w/Filter |
| Muffler |
Engine Tuned (Lo Tone) |
|
ELECTRIC SYSTEM
|
| Battery |
12 Volt (240CCA) |
12 Volt (240CCA) |
12 Volt (340CCA) |
12 Volt (340CCA) |
| Charging System |
13 Amp Flywheel Alternator |
12.5 amp Alternator |
40 Amp Automotive Type Alternator |
15 Amp Flywheel Alternator |
| Ignition |
Electronic Magneto |
Electronic Magneto |
Diesel w/Glow Plug |
Electronic Capacitive Discharge |
| Starter |
12 Volt Electric, Key and Solenoid
Operated |
| Interlock Switch
System |
Ignition Lockout By Seat Switch,
Transmission Neutral And Blade Clutch |
|
TRACTOR DRIVE
|
| Transmission |
Dual Hydrostatic Eaton Model
7, Each Wheel Independently Driven |
| Steering |
Hand Lever Control, Individual
Drive Wheel |
| Forward Speed
Control |
Precision Friction Lock lever,
Cruise Control, With Neutral-Park Position |
| Brake |
Dynamic Braking Through Hydrostatic
Transmission |
| Parking
Brake |
Standard |
Standard |
Standard |
Standard |
| Final Drive |
Gear Axle Drive |
Gear Drive Axle |
|
| Ground Speed
(MPH) |
0-5 infinitely Variable (Forward
Or Reverse) |
| Turning Radius |
Zero (0") |
|
MOWER DECK
|
| Cutting Width
(In) |
36 or 42 (5 Decks) |
36 to 54 (7 Decks) |
36 to 62 (10 Decks) |
36 to 62 (10 Decks) |
| Cutting Height
(In) |
1 to 4 (2.54 to 10.6 cm), 1/2"
(1.27) Increments (DSD52/62 are 1-1/2 to 4-1/2) |
| Blade |
0.164 Inch Stamped Steel, 1566
HR Alloy, Tempered |
| Max Blade Speed |
2900 RPM (16700 FPM With 22"
Blade) |
| Blade Drive |
Splined PTO Drive Shaft/2 High Speed
U-Joints, Shear pin for shock protection on timed gear drive on deck (DSD62 has 3 Belt Driven Spindles) |
| Blade Clutch &
Brake |
Manual Belt Tightener/Scrubber Brake |
Manual Belt Tightener/Band Brake |
Manual Belt Tightener/Band Brake |
Manual Belt Tightener/Band Brake |
| Deck Suspension |
Torsion-Flex Frame With Caster
Wheels and Counterweight Springs |
|
CONSTRUCTION
|
| Frame/Body |
All Welded Unitized Steel Frame
All Welded Unitized Steel Frame/14 Ga Steel Body Shell |
| Mower Deck |
11 Ga Welded Steel |
| GHS Catcher &
Chutes |
Molded Cross-Linked Polyethylene
(High Impact Material, UV Stabilized) |
| Seat |
Contour-Molded With Nylon Backed
Vinyl Cover And Integral Foam Cushion |
|
GHS (OPTIONAL)
|
| Blower |
3-1/2 x 9 x 1/4 Three Blade Steel Paddle Wheel |
4 x 10 x 1/4 Three Blade Steel Paddle Wheel |
4 x 10 x 1/4 Three Blade Steel Paddle Wheel |
4 x 10 x 1/4 Three Blade Steel Paddle Wheel |
| Max Blower
Speed |
3600 |
3600 |
3600 |
3600 |
| Grass Catcher
Capacity |
6.7 Bushel (63 Gal) |
6.7 Bushel (63 Gal) |
7.0 Bushel (247 liters)
{9.5 Bushel (335 liters) optional} |
7.0 Bushel (247 liters)
{9.5 Bushel (335 liters) optional} |
| Full Signal |
12 Volt Horn Operated By Oscillating
Vane Switch on Grass Delivery Spout |
| Powerfil |
Oscillating Delivery Spout Spreads
Material Inside Catcher |
|
TIRE SIZE
|
| Deck Caster
Wheel |
Standard 2.80/2.50-4 Pneumatic
(4 Ply), Optional 8.25 x 2.75 Semi-Pneumatic |
| Drive |
18 x 6.50-8 |
18 x 8.50-10 |
18 x 9.50-8 |
18 x 9.50-8 |
| Rear Tire |
13 x 6.50-6 |
13 x 6.50-6 |
Dual 13 x 5.00-6 |
Dual 13 x 5.00-6 |
|
DIMENSIONS (INCHES)
|
| Outside Dimensions
° |
44-1/2 H x 43 W x 89 L |
44-1/2 H x 43 W x 89L |
49 H x 43 W x 88 L |
49 H x 43 W x 88 L |
| Wheel Base
(Tractor) |
42-1/4 |
42-1/2 |
42-1/4 |
42-1/4 |
| Tread Width
(Tractor) |
28-1/4 |
29-3/4 |
29-3/4 |
29-3/4 |
|
CURB WEIGHT (APPROXIMATE LBS)
|
| SD Tractor Only |
490 |
635 |
760 |
650 |
| GHS Tractor
Only |
565 |
710 |
850 |
740 |
| Tractor and
Mower° |
735 |
875 |
1020 |
910 |
* Engine specifications are for Model MDD
with diesel engine, Model MDG is available with 21-HP gasoline version
of the same Kubota engine
(21-HP @ 3600 RPM, Max Torque = 30.5 ft-lbs @ 2800 RPM) |
|
** High Performance CH26 Kohler Engine is optional, 725CC (44 cu. in.)
displacement, 26-HP @ 3600 RPM, Max Torque = 41.6 ft-lbs @ 2200 RPM
|
° Dimensions and weight shown for GHS
model with 42" deck (typical), subtract 7" height for SD model, 42" deck
weight = 170 lbs,
deck weights range from 150 to 300 lbs for 36" deck and
62" deck respectively |