|
BR-1 Blower Rack*
DB-1 Dual Back Pack Blower Rack
GP-1 and ET/GP-1 General Purpose Blower and Sprayer Rack*
MR-1 Multi-Use Trimmer Clamp
ST-1 STIHL Blower Rack (300 & 400 Series)*
ST-2 STIHL Blower Rack (500 & 600 Series)*
TT-1 Trimmer Rack
TT-2 "Original" (Holds 3 - also available for enclosed trailers)
TT-2 Pro-4 (Holds 4 - also available for enclosed trailers)
* denotes a rack can be mounted to an enclosed trailer wall by adding a spacer
behind the rack to get proper offset from the wall.
 BR-1 Blower Rack*
Provides absolute security for your backpack blowers.
Simply hang your blower on the hook. The automatic latch with stainless steel
spring positively secures the blower. Backrest has holes for attaching an
optional stretch cord.
•Extremely fast loading and unloading time.
•Stainless steel latch spring.
•Heavy gauge all welded steel construction includes high grade mounting hardware
and durable powder coat finish.
•Mounts to open or enclosed trailers quickly and easily.
•Attaches to upper and lower rails of trailer creating a much stronger mount
than racks that attach to the top rail only.
•Some model blowers require the installation of a special adapter kit.
 The following list is correct to the best of our knowledge, however
manufacturers sometimes modify their blowers. Also they add new blowers to their
product line. Due to these
changes, some blowers not listed may or may not require an adapter kit.
The AK-4 is required for the following blowers for the first generation BR-1-1
and DB-1-1:
•Red Max 4800, 5000, and 8000 (depending on 8000 frame style, call TrimmerTrap
at 1-800-279-8727 to verify proper application)
•Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
•Husqvarna 356
•The AK-4 is required for the following blowers for the second generation
BR-1-2 and DB-1-2:
•Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
•Husqvarna 356
•All STIHL blowers require either the ST-1 (Stihl 300 or 400 series) or ST-2
(Stihl 500 or 600 series) Blower Rack.
•THIS RACK IS NOT RECOMENDED FOR STIHL BLOWERS.
All new style BR-1 racks have a redesigned hook (shown above, right) which will
allow for most blower types to be stored in the rack without the use of an AK-4
adapter kits.
The BR-1 can also be mounted on enclosed trailers with full functionality
(spacers available)
 DB-1 Dual Back Pack Blower Rack
The choice of Professional Landscapers. This is the blower rack to have when
space and strength are important. The easy to use automatic positive latching is
"Fast and
Foolproof". Simply pull out the knob and raise the slide to load or unload
blowers. Constructed using 1 1/2" steel tubing and heavy duty components, the
DB-1 is rugged enough
to stand up to years of heavy commercial use.
 •Locks with a standard long shackle padlock.
•Uses less trailer space than side by side single blower racks.
•Durable powder coat finish.
•Includes mounting hardware.
•Mounts to both upper and lower trailers rails for stability.
•Some model blowers require the installation of a special adapter kit. The AK-4
is required for the following blowers for the first generation BR-1-1 and
DB-1-1:
•Red Max 4800, 5000, and 8000 (depending on 8000 frame style, call TrimmerTrap
at 1-800-279-8727 to verify proper application)
•Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
•Husqvarna 356
•The AK-4 is required for the following blowers for the second generation BR-1-2
and DB-1-2:
•Echo 403, 413, 460, 461, 610, 620, 650, 651, 750, and 751
•Husqvarna 356
•All Stihl blowers require either the ST-1 (Stihl 300 or 400 series) or ST-2
(Stihl 500 or 600 series) Blower Rack.
•THIS RACK IS NOT RECOMENDED FOR BR 500 & 600
SERIES BLOWERS
 GP-1 and ET/GP-1 General Purpose Blower and Sprayer Rack*
The GP-1 is a multipurpose rack designed to secure most any style backpack
blower or sprayer. It is available as an open or enclosed trailer version to
meet the needs of just
about everyone. The bottom retention bracket has different height settings and
can also be adjusted laterally to provide a snug, custom fit. Each rack includes
a custom strap
that is widely adjustable using the attached cam-lock buckle.
Maybe the best feature of the GP-1 is that a backpack blower or sprayer can be
installed into the rack while the operator still has it on their back. This
procedure can be performed
on an open or enclosed trailer by simply backing up to the rack and setting the
blower/sprayer onto the GP-1. You can then remove the shoulder straps, turn
around and secure
the tool. With a little practice this procedure will save you time and energy.
To lock a tool onto the GP-1 all that is needed is a short piece of chain and a
"cold shut" link installed into one of the racks many attachment points.
Due to varying designs and different shapes/sizes of equipment an optional "H"
Strap Kit is available for greater customized security of your tools. This kit
is required for securing
backpack sprayers when the GP-1 is used on open trailers.
  The GP-1 for open trailers.
A blower being placed in the ET/GP-1 while the
operator is still wearing the device
The GP-1's retention bracket can be adjusted to the top or the bottom and
forward or backward to accommodate any size blower or sprayer.
 MR-1 Multi-Use Trimmer Clamp -
Patent #6494445
Every landscape contractor needs at least one MR-1 Trimmer Clamp. Quickly load
or unload trimmers with the flip of a single lever. The adjustable spring loaded
jaws, equipped
with large rubber pads, clamp down for a tight, firm grip on almost any line
trimmer or stick edger. The most important feature of the MR-1 is its
versatility. The clamp and clamp
stand are designed as separate parts, and are available separately. This enables
you to inexpensively equip numerous pieces of equipment with clamp stands yet
purchase only as
many clamps as needed. By simply removing a single pin, the clamp can be
 removed
from its stand and installed into a different stand. Go from one mower to
another or to a
work bench in the shop. You can even install a clamp stand to your truck or
trailer to be used when working on trimmers. How's that for versatility?
Note: The MR-1 is for use in off road applications only and is NOT to be used in
any application where a danger could be created should the trimmer come out of
the clamp.
TrimmerTrap, Inc. does however offer a variety of trimmer racks designed for
over the road transportation.
 ST-1 STIHL Blower Rack (300 & 400 Series)*
 The ST-1 is the only rack designed specifically for the BR 300 & 400 Series
blowers. Simply set your blower on the bottom bracket and pivot the top onto the
hang pin, and finish
by installing the retaining pin. The blower is secured at the top and bottom and
will not move around.
•Extremely fast "in and out time."
•Locks with a standard padlock.
 •Heavy gauge welded steel construction is plated for corrosion
resistance.
•Mounts to open or enclosed trailers and includes mounting hardware.
•Retaining pin is secured with a lanyard to prevent loss.
NOTE: Holds only BR 300 & 400 series. Does not hold BR 500 & 600 series
blowers
("Turtle" style blowers). See ST-2 Below
Our ST-1 can be also be mounted in enclosed trailers
 ST-2 STIHL Blower Rack (500 & 600 Series)* -
Patent Pending
The ST-2 is the only rack designed specifically for the STIHL 500 & 600 Series
blowers. Simply set your blower on the lower posts and pivot the top toward the
rack, allowing the
 "sliding lip" to, slide under the handle. Complete installation by pulling the
ball knob on the rack and lowering the "sliding lip" over the blower. The blower
is secured at the top and bottom and will not move around.
 •Extremely fast "in and out time."
•Locks with a standard padlock.
•Heavy gauge welded steel construction is plated for corrosion resistance.
•Mounts to open or enclosed trailers and includes mounting hardware.
NOTE: Holds only STIHL 500 & 600 series ("Turtle" style blowers). Does not hold
BR 300 & 400 series blowers .
The ST-2 can be installed on an enclosed trailer (shown below) by simply adding
a spacer behind the upright bar in order to provide the proper offset from the
wall to allow the
slide mechanism to function properly.
 TT-1 Trimmer Rack
The TT-1 Trimmer Rack is perfect for semi-pros and small contractors who only
need to carry two trimmers. Also popular with larger contractors for carrying
"stick edgers" or
spare trimmers.
 •Holds two trimmers.
•Load or unload a trimmer in 3 seconds.
•Trimmer handle rest is on an angle so that trimmer will not stay on the rack
unless latched.
•3/16" all welded steel construction includes high grade mounting hardware and
durable powder coat finish.
 •Locks trimmers individually with standard padlocks.
•Latch clips are secured to hinge with a lanyard to prevent loss.
•Mounts to open or enclosed trailers quickly and easily.
•Attaches to upper and lower rails of trailer creating much stronger mount than
racks that attach to the top rail only.
•Replaceable handle cradle protects and tightly holds trimmers in place.
 TT-2 "Original" (Holds 3 - also available for enclosed trailers)
Patent # 5647489
The patented TT-2 is unquestionably the world's finest, fastest, and most secure
trimmer rack.
 Whether you choose the TT-2 "Original" (holds 3) or the "TT-2 Pro 4" (holds 4)
you will have peace of mind knowing your trimmers are protected from theft and
damage, yet
easily accessible. Unlike other "wannabe copy cat" racks, the TT-2 can be loaded
or unloaded in only two seconds. Trimmers are automatically latched and tightly
clamped in
place, completely eliminating any chance for operator error. There are no time
consuming pins to fumble with or forget. With other racks you will have the
hassle of a multi-step
procedure dozens of times each day. And after all, wouldn't you like a little
less hassle in your day?
 •Trimmers will not roll around or slide back and forth in rack. Broken triggers,
flooded engines, and spilled fuel are a thing of the past.
 •Heavy all welded steel construction includes high grade mounting hardware and a
durable powder coat finish.
•Mounts to open or enclosed trailers quickly and easily.
•Attaches to upper and lower rails of trailer creating a much stronger mount
than racks that attach to the top rail only.
•Pre-Punched holes for simple installation of the HT-1 hand tool rack.
•Locks with a single padlock.
 TT-2 Pro-4 (Holds 4 - also available for enclosed trailers)
Patent # 5647489
The patented TT-2 Pro 4 is unquestionably the world's finest, fastest, and most
secure trimmer rack. Whether you choose the TT-2 "Original" (holds 3) or the
"TT-2 Pro 4"
(holds 4) you will have peace of mind knowing your trimmers are protected from
theft and damage, yet easily accessible. Unlike other "wannabe copy cat" racks,
the TT-2 can
be loaded or unloaded in only two seconds. Trimmers are automatically latched
and tightly clamped in place, completely eliminating any chance for operator
error. There are no
 time consuming pins to fumble with or forget. With other racks you'll have the
hassle of a multi-step procedure dozens of times each day. And after all,
wouldn't you like a little
less hassle in your day?
•Trimmers will not roll around or slide back and forth in rack. Broken triggers,
flooded engines, and spilled fuel are a thing of the past.
•Heavy all welded steel construction includes high grade mounting hardware and a
durable powder coat finish.
•Mounts to open or enclosed trailers quickly and easily.
•Attaches to upper and lower rails of trailer creating a much stronger mount
than racks that attach to the top rail only.
•Pre-Punched holes for simple installation of the HT-1 hand tool rack.
•Locks with a single padlock.
Patent # 5647489
Both the TT-2 Original and the TT-2 PRO-4 are available in Enclosed Trailer
versions (specify when ordering). Simply attach each upright to the wall,
trimmers are stored up out of
the way and protected from damage.
|
