Vibratory Plow / Boring
 Save
time and money by employing Toro's underground attachments. The
Vibratory Plow lays pipe and/or cable underground with minimal turf
disruption while the Bore Drive Head allows you to easily bore under
driveways and sidewalks.
Dingo Quick Attach System
With the Dingo quick attach system, changing an attachment is as simple as
turning two levers. Hydraulic attachments require connection of two flush face
couplers. Change most attachments in less than one minute.
Clear Operator Visibility
Clear sight lines to all moving parts of the attachment allows for precise
control and operation. This allows any operator to complete jobs in a fast
efficient manner.
Models
22420 - Bore Drive Head
22910 - Vibratory Plow
Call
us toll free
877.428.1546
Or
email for more information |
 |
22420 - Bore Drive Head
The Toro Dingo boring unit allows you to dig under sidewalks and driveways to
simplify irrigation and cable installations. Shorter rod lengths and the ability
to lower the bore head below grade allow you to work in both confined and open
areas, increasing your productivity.
Product Details
* Universal joint increases productivity
* Offset bore drive head
* Connecting rods
Offset Bore Drive Head
Allows for fewer and shorter boring rods aiding in confined area maneuvers and
troublesome angle shots.
Connecting Rods
Let you tunnel under small or large distances.
Universal Joint
Increases productivity by allowing you to keep rods in a horizontal digging
position in the toughest soil conditions.
Accessories
Rod and Reamer Kit
Used with Bore Drive Head to tunnel under driveways, sidewalks and more!.
Requires Bore Drive Head
|
22420 - Bore Drive Head Specifications |
| Standard Equipment |
Flush face Quick-Coupler
Dingo Quick-Attach Mount Plate |
| Bore Drive Head |
Hex Coupler w/ snap-button |
| Rod guide used |
Direct rod |
| Rod and Reamer Kit |
Boring Bit - 1 3/4"
Reamer- 2 1/2"
Repair Kit- 13/16"
Uncoupling Tool - 13/16"
Swivel Shank - 13/16"
4 drill rods - 5' length |
Optional Equipment
|
1 1/4", 1 7/16", 2" Boring Bit
2 1/2" Boring Bit, 2" Reamer
2 7/8", 3 1/4", 3 1/2" Reamer
4 1/2" Reamer |
| Bore Drive Head |
Width 24"
Length 22" |
| Weight |
120lbs |
| Rod and Reamer Kit Weight |
57 lbs. |
|
Email
us for more information on Toro Dingo Equipment -
Or give us a call toll free at 877.428.1546. |
 |

22910 - Vibratory Plow
The Toro Dingo vibratory plow attachment greatly reduces a contractor's time
spent on irrigation and cable installations. Exclusively designed and built by
Toro specifically for use on the Dingo, the vibratory plow optimizes
pipe-pulling performance while minimizing turf damage during an installation.
Also, use the chuted blade and spool carrier to install wire or cable.
Product Details
* Convenient depth-indicator
* Elliptical vibrating motion
Depth Indicator
Convenient, patent pending depth-indicator ensures pipe-laying at uniform depth.
Heavy Cast Coulter
Provides knife like slit in turf ahead of blade. Allows blade to move through
turf with minimal tearing.
Elliptical Vibrating Motion
Creates natural force in the direction of the machine, thus helping to pull pipe
and cable through difficult soil conditions.
accessories
Spool Carrier
Mounts onto Dingo loader arm to carry spool of wire or cable. Used with the
chuted blade assembly for laying cable or wire.
Blade Options
18" Chuted Blade
12" Standard Blade
18" Heavy Duty Blade
18" Standard Blade
Puller Options
1" Taper Lock Puller for PVC
1-1/2" Taper Lock Puller for PVC
2" Taper Lock Puller for PVC
3/4" to 1-1/4" Basket Grip Puller for Poly
1-1/4" to 1-1/2" Basket Grip Puller for Poly
Link Wire Puller for Poly
|
22910 - Vibratory Plow
Specifications |
| Standard Equipment |
Quick Couplers
Mount Plate |
| Hoses |
Two high-pressure hoses |
| Quick Couplers |
Male & Female Quick Couplers |
| Plow Depths |
Adjustable f/ 6-12" std blade |
| Using Plow Blade |
Adjust f/ 12-18" Depths |
| Pipe Size |
Effectively pull up to 1.5"dia |
| Measurements |
Width 28.2"
Length 34.0" |
| Height |
27.0" w/o Blade
40.2" w/ Blade |
| Weight |
457 lbs |
| Mount Frame |
Fabricated, welded steel frame |
| Bearings |
4 pressed-in spher. roller |
| Gear Cover A |
machined, cast aluminum |
| Cast Coulter |
9" diameter disc |
| Optional Chuted Blade |
Used for laying wire or cable |
| Optional Blade #99-8647 |
Fabricated, welded .38" thick |
| Optional Blade #99-8600 |
Fabricated, welded .50" thick |
| Chain & Bullet |
Machined, plated 2" hex bullet |
| Optional Bskt Grip Puller |
Plastic coated double & triple weave |
| Depth Gauge |
Depth set by blade. |
|
Email
us for more information on Toro Dingo Equipment -
Or give us a call toll free at 877.428.1546. |
 |

| Connecting Attachments
is Easy! |
 |
 |
 |
| Line up Attachment and insert
boom into receiver |
Turn locking pins to secure |
Connect hydraulic lines and
that's it! |
|