Arborist Equipment
Homeowner Equipment
Commercial Equipment
Standby Generators
General Purpose Engines
Mowing Equipment
Honda Marine Accessories
Dingo Equipment

We offer local installation as well as parts and service.

Email us for more information on Toro Dingo Equipment or give us a call at 877.428.1546.

TX420 | TX425
TX413 | 220
323 | TX525N
TX525W | Attachments
Parts Reference

Be sure to ask us about our Previously Owned equipment & attachments!


 

 

Advanced Mower
877.428.1546

 

 


TX420

TX425

TX413

220

323

TX525N

TX525W

Attachments
We have a huge selection of parts and accessories in stock right now!
Looking for a replacement part? Check out the Parts Reference
Dingo Auger Drives and Augers

Toro Dingo Auger Drives and Augers are built for productivity and durability. In any drive head, there is a trade off between torque (power) and bit speed (revolutions per minute). Toro offers two heads, one for torque and one for speed. Toro's High Torque Drive Head maximizes the torque or "power" of the auger. The High Torque head turns the auger bits at a slower speed and very high torque (power) level allowing the Dingo to auger up to 30" holes while maintaining a constant spin speed. In contrast, the Universal Swivel Drive Head combines torque and speed to produce a faster head designed for smaller augers. The Universal Swivel Power Head turns the auger at a higher speed allowing the auger to penetrate the soil much faster. The Universal Head swivels in all directions, allowing the operator to auger plumb holes on hills, uneven

Durable Steel Housing
The steel housing on the Toro power heads protects the components from damage, wear and unwanted dust.

Multiple Head Orientation
Toro drive heads can lock into multiple orientations. This allows the contractor to use the drive head in a horizontal or vertical direction. The heads pivot to allow additional attachments such as the cement bowl, capstan adapter and screw anchor adapter.

High Torque Planetary Gear Drive
The high torque planetary gear drive of the Toro power heads provides years of service. The gear drive induces less stress on the hydraulic motor insuring a long life.

Dingo Quick Attach System
With the Dingo quick attach system, changing an attachment is as simple as turning two levers. Hydraulic attachments require connection of two flush face couplers. Most attachments can be changed in less than sixty seconds.

Call us toll free 877.428.1546
Or email for more information
Advanced Mower


22805-High Torque Auger Power Head

In any drive head, there is a tradeoff between torque (power) and speed (revolutions per minute). The high torque head provides a large amount of torque (power) to the auger at a slower speed. The high torque (power) translates into the Dingo's capability to dig 30" holes up to 5' deep in clay, gravel, sandstone and many other conditions where lower torque heads get stuck.

Product Details
* Designed for large auger bits up to 30"
* High Torque (Power) Drive
* One Person Bit Change

Any of the Toro Augers can be changed on the head with only one person! The 2 9/16" diameter shaft allows easy fitting of the head to the auger. Most other competitors require two people to change an auger.

Single Directional Pivot
Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.

Horizontal Lockout
The head locks in the horizontal position for usage with the Toro Cement Bowl, Capstand Adapter and more.

Planetary Gear Drive
The planetary gear drive provides maximum torque at a consistent level. The planetary gear drive also insures the longevity of the power head by transmitting less stress to the hydraulic motor.

 Specifications
Standard Equipment Quick Couplers
2- 9/16" round output shaft
Dingo Quick-Attach Mount Plate
Pivot Pins 1"
Motor Type Eaton 2000 series Gerotor
Displacement 11.9 cubic inches
Rated Pressure  3000 psi continuous
Gear Drive Type Auburn Gear Model 6 Planetary
Hoses Two high-pressure hoses
Quick Couplers Male & Female Flush Face
Measurements Length 24"
Width 16"
Height 22"
Weight 176 lbs.
Bit Speed  54 rpm (@11gpm, 95% efficiency)
orque 1514 ft-lb @3000psi, @11gpm
Email us for more information on Toro Dingo Equipment - Or give us a call toll free at 877.428.1546. Advanced Mower


22806-Universal Swivel Auger
This attachment swivels in all directions to create plumb holes on uneven terrain. The higher speed of this auger power head is ideal for augers up to 18 inches in diameter. Quickly change between auger bit sizes to dig holes for fence posts, footings, irrigation heads and more! You can even secure cables and tent posts with the screw anchor adapter.

Product Details
* Universal Pivot
* Recommended for bits up to 18"

One Person Auger Change
Any of the Toro Augers can be changed by only one person! The 2 9/16" diameter shaft allows easy fitting of the head to the auger. Most other drive heads require two people to change the auger.

20 Universal Pivot
Power head swivels in all directions allowing the contractor to create plum holes on hills, slopes and uneven terrain. The universal swivel also makes the head adaptable for screw anchor installation and capstan adapter.

High Speed Drive
The high speed drive provides maximum bit speed allowing the auger to dig holes very fast. The high speed drive is fantastic for any contractor wanting to auger many holes in a short period of time.

Planetary Gear Drive
The planetary gear drive provides high speeds and maximum torque to the auger, while transmitting minimal stress on the auger head components. The planetary gear drive insures the longevity of the hydraulic motor.

Accessories
9" Rock Auger
Used for extreme digging conditions, rock, coral, etc. Replaceable carbide teeth.

6" 9" 12" 15" 18" 24" 30" Augers
Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The fitting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro welds will not break under the same conditions. The Toro flighting is composed of 3/8" thick continuous steel where many other augers are 1/8" thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components.

Cement Bowl
Haul, mix, and pour up to 200 lbs (dry) cement. Eliminates hand mixing.

12" & 24" Auger Extension
Made from the same high strength material as the auger shaft, the extension can be added to increase the depth of the hole.

 Specifications
Standard Equipment Quick Couplers
Two 9/16" round output shaft
Dingo Quick-Attach Mount. Plate
Pivot Pins 1" O.D. x .5" I.D. steel space
Motor: Type Eaton 2000 Series Geroler
Displacement  8.0 cubic inches/ rev
Rated Pressure 3000 psi continuous
Flow Range  0-20 gpm
Mounting Type 4-Bolt Magneto Mounting
Shaft Type  1-1/4" 14 tooth splined shaft
Ports  7/8-14" SAE ORB ports
Gear Drive Type Auburn Gear Model 6 Planetary
Hoses Two high-pressure hoses
Quick Couplers  Male & Female Flush Face
Measurements: Length 18"
Width 25"
Height 21"
Weight 217lbs
Bit Speed 80rpm @11gpm
 Torque 1060 ft-lb @3000p
Email us for more information on Toro Dingo Equipment - Or give us a call toll free at 877.428.1546. Advanced Mower


22804-TX 413 Auger Power Head
Creates holes up to 24" diameter. This auger power head is great for fence posts, deck footings, irrigation boxes and planting trees. Optional 6", 9", 12", 15", 18" or 24" Augers available.

Product Details
* Designed for auger bits up to 24"
* High speed drive
* Single directional pivot

One Person Bit Change
Any of the Toro Augers can be changed on the head with only one person! The 2 9/16" diameter shaft allows easy fitting of the head to the auger. Most other competitors require two people to change an auger.

Single Directional Pivot
Front to back directional pivot provides the operator with exceptional control when digging with large augers. The single directional pivot prevents the auger from kicking left to right and reduces flailing.

Accessories
6" 9" 12" 15" 18" 24" Augers
Toro Augers are designed for years and years of service. From the penetration tip of the bit to the connection design on the shaft, Toro augers are engineered for durability. High carbon teeth penetrate the soil and protect the flighting. The teeth are easily replaceable when they become worn. The flighting on all Toro augers is connected to the shaft by a continuous weld. Most other auger flightings are tack welded at 2 or 3 spots on the shaft. High stress can cause the tack welds to crack and break, Toro augers will not break as easily. The Toro flighting is composed of 3/8" thick continuous steel where many other augers are 1/8" thick or less. The shaft of the auger firmly connects to the power head reducing "play" in the system and creating a longer lasting auger. This connection provides less "shock" to the power head, lengthening the life of the head and its components.

12" & 24" Auger Extension
Made from the same high strength material as the auger shaft, the extension can be added to increase the depth of the hole.

9" Rock Auger
Used for extreme digging conditions, such as rock and coral. Replaceable carbide teeth.

 Specifications
Standard Equipment
Quick Couplers
2- 9/16" round output shaft
Dingo Quick-Attach Mount Plate
Pivot Pins 1" 
Displacement  20. cubic inches 
 Rated Pressure 3000 psi continuous
Hoses  Two high-pressure hoses
 Quick Couplers Male & Female Flush Face
Measurements Length 15"
Width 124"
Height 23"
Weight 135 lbs.
Bit Speed 66 rpm @ 6.5gpm, 90% efficiency)
 Torque 654 ft-lb @ 2650psi, @ 6.5gpm
Email us for more information on Toro Dingo Equipment - Or give us a call toll free at 877.428.1546. Advanced Mower


Connecting Attachments is Easy!
Line up Attachment and insert boom into receiver Turn locking pins to secure Connect hydraulic lines and that's it!
Advanced Mower
Email us for more information on Toro Dingo Equipment
Or give us a call toll free at 877.428.1546.