![]() |
![]() |
![]() |
||||||
|
|
||||||||
|
|
|
|
|
|
|
|
||
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||||||||||||||||
22319 - Dingo TX 525 Narrow Track
- 4-Pump Hydraulic System4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! - Hydraulic Power The TX 525 models' auxiliary hydraulic performance makes the most challenging ground conditions irrelevant by pumping 24 hp to the attachment. Four independent hydraulic pumps deliver: 16.9 gpm of flow to each track 13.8 gpm to the auxiliary 6 gpm to the loader arm - Simple ControlsYou're up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms - all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly. - Liquid-Cooled Diesel Engine The 25 hp KubotaŽ diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require. - Compact SizeNarrow enough so you can bring hydraulic power easily into 42" access points; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability. - Exclusive Track Drive Kevlar reinforced tracks, designed specifically for the Toro Dingo TX to offer excellent traction and floatation even in the most difficult conditions. This means you can power through the toughest jobs and still be light on the turf.
Or give us a call toll free at 877.428.1546. |
|||||||||||||||||||||||||||||||||||
| TX525 Specifications | |
| Engine | 25 HP Engine KubotaŽ |
| Cooling System | Liquid Cooled |
| Hydraulic System Pressure: | 3000 psi relief |
| Auxiliary Flow | 13.8 gpm |
| Loader Arm Flow | 6 gpm |
| Traction Flow | 16.9 gpm |
| Reservoir Capacity | 10.5 gallons |
| Track | Endless Kevlar reinforced rubber |
| Controls | Key, throttle, choke |
| Steering | Single control w/ ref. bar |
| Loader/ Hydraulic System | Joystick control for all functions |
| Dimensions: | Ground Clearance 4.6" Overall Length 70.7 Overall Width 33.7" Overall Height 46.1" Hinge Pin Height 65.8" |
| Ground Speed | 0-4.5 mph fwd, 0-2 mph reverse |
| Tip Capacity (max lift) | 1,580 lbs |
| SAE Rated Operating Capacity | @ 35% tip 553 lbs. |
| Weight | 1904 lbs. |
| Ground Pressure | 5.2 psi |
| Warranty | Engine Warranty* Two Year Product Warranty* One Year |
![]() Email us for more information on Toro Dingo Equipment Or give us a call toll free at 877.428.1546. |