Honda Water Pumps
De-Watering Pumps
  WX10 | WX15 | WB20  WB30 | WH15 | WH20
Construction Pumps
  WT20 | WT30 | WT40 WDP30
Multi Purpose Pumps
  WMP20
Submersible Pumps
  WSP33 | WSP50 | WSP53 WSP73 | WSP100
Pump Accessories

Having trouble with your pump? Check out the Water Pump Troubleshooting information.

We offer local installation as well as parts and service at our two store locations.

Email us for more information on Honda Water Pumps or give us a call at 877.428.1546.

 
 

 

Honda Multi-Purpose
Water Pump

Honda Pumps|De-Watering|Construction|Multi Purpose|Submersible
General Purpose Multi-Purpose Pump
The Honda Multi-Purpose Pump is the choice when pumping of approved industrial and agriculture chemicals is required. This pump is equipped with EPDM seals and a rugged fiberglass reinforced polyester housing to ensure reliable operation while pumping approved chemicals.
 
WMP20
Specially designed for transferring chemicals and other liquids.
 
List of Approved Pumping Applications
Industrial Chemicals
Acetic Acid, 20 % Lactic Acid Sodium Bisulfate
Aluminum Sulfate Lead Acetate Sodium Bisulfite
Ammonium Nitrate Magnesium Chloride Sodium Carbonate, 10%
Ammonium Sulfate Magnesium Nitrate Sodium Chlorate
Barium Sulfate Magnesium Sulfate Sodium Chloride
Borax (Sodium Borate) Maleic Acid Sodium Nitrate
*Calcium Chloride Nickel Chloride Sodium Silicate
Citric Acid Nickel Sulfate Sodium Sulfate
Copper Sulfate Oleic Acid Stearic Acid
Detergents (General) Phosphoric Acid, 0-80 % Sulfuric Acid, 0-29 %
Ethylene Glycol Potassium Carbonate Tartaric Acid
Fatty Acids Potassium Chloride Vinegar
Ferric Nitrate Potassium Nitrate Water (Clear)
Ferric Sulfate Potassium Sulfate Water (Salt)
Ferrous Sulfate Soaps (neutral) Zinc Sulfate
Formaldehyde, 40 % Sodium Acetate  
Glycerine (Glycerol) Sodium Bicarbonate  

* Temperature does not exceed 27oC (80oF).

Agricultural Chemicals
Aatrex Dual Phosphoric Acid Solutions
Amiben Eradicane Poly-N
Ammonium Thiosulfate Extrazine Ranger
Avenge Larsban Round-up
Banvel Lasso Sutan
Basagran URAN Solutions Treflan
Bicep Modown Vernam
Bladex N-Serve 24  

- Do not use the WMP20X for pumping liquids for human consumption.
- After each use drain the pump housing into a suitable container and flush with fresh water.
- The temperature operating range of the pump is between -7 and 54oC (20 and 130oF).
Advanced Mower Email us for more information on Honda Water Pumps
or give us a call at 877.428.1546.
 
Honda Pumps | De-Watering | Construction | Multi Purpose | Submersible

 

Model /
Specifications
WMP20
Honda 4-stroke, single cylinder, air cooled engine GX160 OHV 5.5HP
Displacement 163cc
Bore and Stroke 2.7" x 1.8"
Compression Ratio 8.5:1
Pump Type Multi-purpose Centrifugal Self priming
Volute Rigid Mounted Fiberglass reinforced polyester
Impeller Fiberglass reinforced polyester
Mechanical Seal Carbon/Ceramic
Priming Time 65 sec. at 16.4 ft.
Drive System Direct
Discharge Capacity 220 gals./min.
Suction Port Diameter 2.0" NPT
Discharge Port Diameter 2.0" NPT
Total Head Lift 105 ft.
Suction Head Lift 26 ft.
Maximum Pressure 45 psi
Solids Handling N/A
Dimensions 20.5" x 15.7" x 17.7"
Dry Weight 56 lbs.
Strainer Part # 78325-YE0-003
Model / Specifications WMP20
Advanced Mower Email us for more information on Honda Water Pumps
or give us a call at 877.428.1546.