Honda Construction Water Pumps - Advanced Mower

Honda Pumps|De-Watering|Construction|Multi Purpose|Submersible

Construction Water Pumps

Honda trash pumps are designed to allow solids(sticks, stones, and debris) up to 13/16 inch for the 2 inch model and 1 1/16 inch for 3 and 4 inch models to flow through the pump without clogging, making them ideal for construction sites. The WT pumps are designed to move water, and lots of it. The WT40 will move water at a rate of 433 gallons per minute and is capable of handling solids without clogging. A quick clean out port and easy maintenance features ensure long service life. Honda Trash Pumps are the ultimate choice for contractors and rental applications.

WT20 Powered by the legendary Honda GX160 Industrial engine this new Trash Pump offers a unique Conical impeller for exceptional priming and pumping performance. Features include, easy maintenance wear plate, wear resistant seal, easy impeller removal and standard tool for pump maintenance, light weight aluminum pump housing, isolation engine mounting, standard suction hose strainer, full frame and oil alert.

WT30 Powered by the legendary Honda GX240 Industrial engine this new centrifugal Trash Pump offers a unique Conical impeller for exceptional priming and pumping performance. Features include, easy maintenance wear plate, wear resistant seal, easy impeller removal and standard tool for pump maintenance, light weight aluminum pump housing, isolation engine mounting, standard suction hose strainer, full frame and oil alert.

WT40 Powered by the legendary Honda GX340 Industrial engine this new Trash Pump offers a unique Conical impeller for exceptional priming and pumping performance. Features include, easy maintenance wear plate, wear resistant seal, easy impeller removal and standard tool for pump maintenance, light weight aluminum pump housing, isolation engine mounting, standard suction hose strainer, full frame and oil alert.

Diaphragm Pump
This positive displacement pump is low volume and is not limited to pumping clear water: a diaphragm pump can pump mud, trash and more. Honda Diaphragm Pumps are capable of running dry and pumping water with greater than 25% solids by volume. Perfect for slow seepage situations. You can count on Honda to keep the site dry.
WDP30 This heavy-duty 3" diaphragm pump powered by a Honda GX120 commercial-grade engine. Honda Diaphragm Pumps offer exceptional durability and performance with features such as special rock channel and spring loaded connecting rod that prevents damage from sediment buildup. The WDP30 is ideal for muddy water, sludge, or any water with a high percentage of solids. Because it can run without water, this pump is also perfect for areas with slow seepage, like work sites where groundwater is slowly seeping in.

Model / Specifications	WT20	WT30	WT40	WDP30
Honda 4-stroke, single cylinder, air cooled engine	GX160 OHV 5.5HP	GX240 OHV 8HP	GX340 OHV 11HP	GX120 OHV 4HP
Displacement	160cc	240cc	340cc	118cc
Bore and Stroke	2.7" x 1.8"	2.9" x 2.3"	3.2" x 2.5"	2.4" x 1.7"
Compression Ratio	8.5:1	8.2:1	8.0:1	8.5:1
Pump Type	Trash Centrifugal Self Priming	Trash Centrifugal Self Priming	Trash Centrifugal Self Priming	Diaphragm Self-priming
Volute	Rigid Mounted Cast Iron w/ Stainless Wear Plate	Rigid Mounted Cast Iron w/ Stainless Wear Plate	Rigid Mounted Cast Iron w/ Stainless Wear Plate	Rigid Mounted Cast Iron
Impeller	Conical Cast Iron	Conical Cast Iron	Conical Cast Iron	N/A
Mechanical Seal	Silicone Carbide	Silicone Carbide	Silicone Carbide	N/A
Priming Time	70 sec. at 16.4 ft.	100 sec. at 16.4 ft.	160 sec. at 16.4 ft.	20 sec. at 20.0 ft.
Drive System	Direct	Direct	Direct	Direct
Discharge Capacity	187 gal./min.	319 gal./min.	433 gal./min.	80 gal./min.
Suction Port Diameter	2.0" NPT	3.0" NPT	4.0" NPT	3.0" NPT
Discharge Port Diameter	2.0" NPT	3.0" NPT	4.0" NPT	3.0" NPT
Total Head Lift	98 ft.	89 ft.	85 ft.	50 ft.
Suction Head Lift	26 ft.	26 ft.	26 ft.	24 ft.**
Maximum Pressure	42 psi	39 psi	37 psi	N/A
Solids Handling	13/16 inches	1 1/16 inches	1 1/16 inches	2.4"
Dimensions	24.4" x 18.1" x 18.3"	26.0" x 19.5" x 20.3"	28.9" x 21.1" x 22.2"	32.5" x 23.4" x 25.0"
Dry Weight	104 lbs.	132 lbs.	172 lbs.	120 lbs.
Strainer Part #	78325-YG0-003	78325-YG1-003	78325-YG2-003	M51-0000-080
Model / Specifications	WT20	WT30	WT40	WDP30